Direct answer: Use about 1 g of coffee to 13–16 g of water, a medium grind, and water at about 93 °C (93 ± 3 °C). Rinse the paper filter, then bloom the grounds with twice their weight in water for about 30 seconds. Pour the rest slowly in a spiral and aim to finish in 2–4 minutes. These are the National Coffee Association's figures. Hario's V60 recipe uses a 1:14 ratio and finishes within 3 minutes, while Chemex calls for a medium-coarse grind.
Next: Beginner coffee kit · Chorreador guide
What you need
- A dripper: a Hario V60 or a Chemex. Hario named the V60 after its 60° cone. The NCA notes that the Chemex's thicker filter slows the flow.
- Filters that fit the dripper. A filter that bunches up makes the water flow unevenly.
- A kettle. A long, thin gooseneck spout makes pouring easier to control. Keep a thermometer handy if the kettle doesn't have one.
- A digital scale, so you can repeat a brew you liked.
- A burr grinder, for a consistent grind.
Step by step: Hario V60
This follows Hario's basic recipe: 1 part coffee to 14 parts water, medium grind, 93 °C.
- Fold the seam of the paper filter and seat it snugly in the dripper.
- Pour hot water over the whole filter to warm the gear and rinse out the paper taste. Pour the rinse water away.
- Add the coffee, shake gently to level it, and set the dripper on your server or mug.
- Pour twice the coffee's weight in water, starting slowly from the center until all the grounds are wet. Wait 30 seconds.
- Pour the rest in three parts, each four times the coffee's weight. Spiral out from the center and avoid pouring straight onto the paper.
- Hario says the brew should finish within 3 minutes, however many cups you make.
For example, with 15 g of coffee: bloom with 30 g of water, then pour three times 60 g, for 210 g in total.
Step by step: Chemex
This follows Chemex's instructions for its Classic Series:
- Grind to medium-coarse.
- Open a Chemex bonded filter into a cone so the three-layer side covers the pouring spout.
- Add one rounded tablespoon of coffee per 5 oz cup. Chemex says to use more if you like it stronger.
- Bring the water to a boil, take it off the heat and let it stop boiling vigorously. Wet the grounds with a little water and let them bloom for about 30 seconds.
- Pour slowly, keeping the water at least a quarter inch below the top of the Chemex. Use circular or back-and-forth pours so the grounds saturate evenly.
- Lift out the filter and grounds. Chemex says its filters are biodegradable and compostable.
Dialing in a Tarrazú coffee
Change one thing at a time. The NCA's guide says to grind coarser if the cup tastes bitter and finer if it tastes flat or watery. On a Baratza Encore, the maker suggests starting at 15 for a V60 and 20 for a Chemex. It adds that the right setting shifts with roast level and freshness, so expect to adjust when you open a new bag. Lighter roasts show more of Tarrazú's acidity. See roast levels.
Water and cleanup
The NCA recommends starting with cold water, filtered if possible, and avoiding distilled or softened water. Rinse paper filters every time, bleached or unbleached, to avoid a papery taste. Paper filters also hold back more of the coffee's oils than metal or cloth, which gives a cleaner, lighter cup. For a Costa Rican take on pour-over with a cloth filter, see the chorreador guide.
Shop on Amazon
Amazon links use our partner tag (easycostarica-20). Prices and availability live on Amazon.
HARIO V60 Plastic Coffee Dripper, Size 02, Clear
Size-02 plastic V60 dripper for pour-over.
Chemex Pour-Over Glass Coffeemaker - Classic Series - 6-Cup - Exclusive Packaging
Classic 6-cup Chemex for pour-over and filter brewing. (“Exclusive Packaging” is part of the Amazon listing title.)
Hario V60 Paper Coffee Filter, Size 02, Natural, 100ct
Natural size-02 papers that fit the V60-02 dripper.
Chemex Bonded Filter - Square - 100 ct - 2 Pack - Exclusive Packaging
Bonded Chemex square filters for the Chemex coffeemaker. (“Exclusive Packaging” is part of the Amazon listing title.)